Handmade online Plywood wooden volume climbing holds L size

Lightweight fiberglass-based volumes finished with natural veneer.

Presentation:
https://drive.google.com/file/d/1UiS3PKVkI5I-CT0j0ibq7kbd7tBg0EtN/edit

The active part of the hold has a grippy surface and it can be performed at different angles relative to the wall. Starting from +30° jugs up to -30° sloppers.
There are 7 active angles on your choice: +30°, +20°, +10°, 90°, -10°, -20°, -30°.

You can build any route and adjust its difficulty just by changing the hold with the next active angle.


Stackable

All the holds with opposite angles perfectly stack together. From wide cracks to tiny crimps, partially overlapped or even fully closed holds. Almost unlimited number of combinations.



Finishes

The face of the hold can be applied with a wood veneer of your choice finished with a durable lacquer.



Mounting

Use all the mounting holes to install the volume. Set your drill at a max of 100 in. lbs. (11 nm) of torque, otherwise, you can damage the veneer finish.

________________________

Use it as a fingerboard

Choose the incline angle that fits your level. The difficulty varies from center to the sides of the volume.

_________________________

Large - 80x20x8 cm
___________________________

Lightweight

The fiberglass base reduces the weight by about 2x times. Our largest volume 1m long weighs just 1.2kg against 2.7kg made of a standard 18mm thick plywood. Easier route setting, safer on falls.

___________________________

THESE HANDMADE HOLDS ARE ALL SENT TRACKED

If you have any questions please feel free to send us a message!
We're on Instagram and Facebook check us out.